Horizontal Slurry Pump can be widely used in mining, metallurgy, electric power, coal, chemicals, building materials and other industries, transportation of abrasive and corrosive slurry containing solid particles, the maximum weight concentration of solid-liquid mixture: 45% mortar, pulp 60 %. So, horizontal
Slurry Pump in the course of the routine maintenance of what points? What are the main points of the daily maintenance of horizontal slurry pump? 1) Bearing water pressure, water to meet the requirements, at any time to adjust (or replace) the degree of tightness of packing, do not cause shaft seal leakage. And timely replacement sleeve. 2) When replacing the bearings, be sure to ensure that the bearing assembly dust-free, clean lubricating oil, slurry pump running bearing temperature is generally not more than 60- 650C is appropriate, the maximum does not exceed 750C 3) to ensure that the motor and the slurry pump Concentricity, to ensure complete and correct elastic pad in the coupling, should be promptly replaced after damage. 4) Ensure that the components of slurry pump and pipeline system are installed correctly, solid and reliable. 5) Some components of slurry pump belong to wearing parts. Pay attention to the wearing condition of wearing parts in daily use and repair or replace them in time . Slag slurry pump wearing parts repair or replacement process to ensure that the assembly is correct, clearance adjustment is reasonable, to avoid the phenomenon of tight astringent friction. 6) Slurry pump suction piping system must be leak-free state, while in operation should pay attention to the suction port is blocked. Slurry pump to deal with more media with solid particles, so placed in the pump into the grid should be consistent with the requirements of the slurry pump particles can be reduced to reduce excessive particles or long fiber material into the pump may cause blockage may Sex. (Editor: Huang Nengwen QQ:)
July 27, 2023
