Vertical slurry pump routine maintenance What are the points?

Vertical Slurry Pump from the principle of belonging to the centrifugal pump, conceptually refers to the use of centrifugal force (Impeller rotation of the pump) the role of the solid and liquid mixed media to increase energy of a mechanical, electrical energy into media Kinetic and potential energy equipment. What are the points of daily maintenance of vertical Slurry Pump? 1) Bearing water pressure, water to meet the provisions, at any time to adjust (or replace) the degree of tightness of the filler, do not cause shaft seal leakage. And timely replacement sleeve. 2) When replacing the bearing, be sure to ensure that the bearing assembly is dust-free and the lubricating oil is clean. The bearing temperature during pump running is generally not more than 60-6500C and not more than 750C. 3) To ensure the motor and pump concentricity, to ensure complete and correct elastic pad coupling, damaged promptly replaced. 4) To ensure that the pump components and piping system is installed correctly, solid and reliable. 5) Some components of the slurry pump belong to wearing parts, we should pay attention to the loss of wearing parts in daily use and repair or replace them in time. Slurry pump wearing parts repair or replacement process to ensure that the assembly is correct, the gap adjustment is reasonable, to avoid the phenomenon of friction astringent. 6) Slurry pump suction piping system must be leak-free state, while in operation should pay attention to the suction port is blocked. Slurry pump to deal with more media with solid particles, so placed in the pump into the grid should be consistent with the requirements of the slurry pump particles can be reduced to reduce excessive particles or long fiber material into the pump may cause blockage may Sex. (Editor: Huang Nengwen QQ:)