Brand: MUYUAN
Impeller Number: Single-Stage Pump
Working Pressure: Low Pressure Pump
Influent Type of Impeller: Single Suction Pump
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Ash Pumps
Material:High Chrome: Size：1“ ~24“
Use: For Mineral Concentration: Name：Slurry Pump Spare Part
Packaging: Plywood Cases
Productivity: 8000 sets
Transportation: Ocean,Land,Air
Place of Origin: China
Supply Ability: 8000 sets
Certificate: ISO9001
HS Code: 8413910000
Port: Xinggang,Xinggang,Xinggang
Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union
Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
High Chrome Wear Resistant Slurry Pump Spare Parts
Slurry Pump Parts Introduction:
The high chromium cast iron is a series of chromium wear resistant cast iron with chromium content over 12 weight %, which currently is the most widely wear resistant material. So the high chromium cast iron shows high wear resistance in delivering slurry contained hard solid particles. The representative of the high chromium cast iron is Alloy M05 and M07; Meanwhile for specific application they derive the Alloy M49 and M33 with excellent corrosion resistance, and Alloy M12 and M61 with higher wear resistance etc.
The high chrome Cast Iron Pump Parts include the wet end parts such as the volutte liner, Impeller, and throatbush etc. Except the high chrome, we can also offer the ployurathane pump parts, Rubber Pump Parts, Ceramic Pump Parts and Stainless Steel Pump Parts etc.
Application:
The material properties of the high chromium pump parts are made by a judicious compromise between three respects: hardness, toughness and corrosion resistance, Selections of material for specific applications, except the above three respects, we should take operation condition into consideration.
The High Chrome Production Process:
Material Table :
Material Material Code Description Hardnes (HRC) Impact Toughness (J/cm2) Standards High Chrome M05 M05 is a special alloy material, which especially is suitable for conditions with high impact load and good corrosion resistance. It is used in working condition when pH range is 5~12 ≥58 5~7 ASTM A532 CL III-A M07 Compared with M05, it has a slightly lower abrasiveness and good anti-impact performance, and it is more suitable for lowe abrasive conditions. It is used in working condition when pH range is 5~12 ≥58 5~7 ASTM A532 CL III-A M12 It has higher wear resistance than M05, but it is not resistant to corrosion. It is used in working conditions where the PH value is 6~14 and M05 is not suitable. 60~67 2~5 M49 It has certain anti-impact and good corrosion resistance. It is used in the weak acid environment with pH range 4-6, especially suitable for flue gas desulfurization equipment in thermal power plants. 35~45 5~7 M33 It has certain anti-impact and corrosion resistance and is used for oxidizing slurry with pH =1,such as conveying phosphogypsum and medium such as nitric acid, sulfuric acid and phosphoric acid. 30-40 5~7 M61 M61 has better toughness than M12, and its matrix can be further harden by heat treatment, which can improove the anti-abrasion performance. 60-67 5~6
Product Categories : Pump Spare Parts > High Chrome Pump Parts
Tel: 86-0311-86131743
Fax: 86-0311-87706011
Mobile Phone: +8613398610529
Email:sales@cnmuyuan.com
Website: https://www.cnmuyuan.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now